2.4ghz Formula 1 conversion

Donate Via Paypal and Help Support this site.

   

[briankstan]

so this was brought up in a thread on MZR and I wanted to share the info here as well.   I have added the antenna back on my F1 and so far is seems to fit my throttle from cutting out.

Below are the posts from MZR.  It seem that by adding an an antenna to it that is will solve some of the issues.

It's not optimal, but for some reason I ALWAYS have to run an antenna on my 2.4 F1... This may be the case for your particular MR-03 in that environment. Try soldering a little tab on there and mounting an antenna?

Sorry off topic:

Joe,  can you elaborate on what your F1 is doing?  Mine act funny sometimes. Sometimes mine has a weird throttle issued, it feels like it's cutting out.   I haven't been able to figure out why it does it.  I've replace all the wires the the problem is still there.

I have some glitching with my F1 as well, going to try an antenna as well to see if it helps.

Hmm glitching with the F1 2.4? interesting I don't have any gitching.  I converted my AM F1 to 2.4 using an MR02 2.4 board, so far no glitching.

WAAAY off-topic... I've tried 3 difference 2.4 ASF boards in my F1. All glitched. The motor starts cutting out, etc. Put an antenna on it, and it's ROCK SOLID.

briankstan
Russ
Ryan
Chad
CLODGUY
wild child
benihanna80
trackstar

Utah RC Forums

Mini-Z Forums

  RCP Race Tracks

Mini-Z Racing Venues

Salt Lake Mini-Z Online Store