are there different versions of MR03S controller board ?

Donate Via Paypal and Help Support this site.

   

[billp]

y'all;
in order to have my MR03S use different brushed motors,
i have embarked on changing the fets on my MR03S controller board.

it has been a long and costly endeavour but
i have finally soldered a new set of fets (4) onto my
original MR03S controller board.

during this learning process i have come across different
versions of the MR03S controller board.

i had purchased a MR03S controller board to practice on.  this separate controller board only had
pads for 2 fets and they were located on the bottom side of the board.  unfortunately, i lifted
some of the copper trace on this board, and rendered it unuseable.  i saved the pot
and servo motor for spares.

so i began to replace the fets on my original MR03S readyset car.  the controller card
in this MR03S car had soldering pads for 4 fets, 2 on the top side, and 2 on the bottom side.
this time around, i successfully replaced the 2 existing fets, and added 2 more on the
other side of the board.  i have tested this controller board and it is working,  and there is
no time delay (approx .5 sec) when switching from forward to reverse !

so, after all this, i want to put out the following questions:
- are there different versions of the MR03S controller board ?
- if so,  which version contains the soldering pads for 2 fets on top and bottom face
of the controller card ?

the controller board with the soldering pads for 4 fets (2 on top, 2 on bottom) is the preferred board to have for this modification, IMO...

unfortunately, i cannot post pics cause an error message is informing me there is no more room for
attached pics.

thank you for your help,
billp

[briankstan]

I know the original 03S boards had fets on only one side of the board but had pads on the bottom without fets.   there is now a version 2 03S board out but I haven't seen one so not sure on all the differences.

briankstan
Russ
Ryan
Chad
CLODGUY
wild child
benihanna80
trackstar

Utah RC Forums

Mini-Z Forums

  RCP Race Tracks

Mini-Z Racing Venues

Salt Lake Mini-Z Online Store