Chad's Mini Giant

Donate Via Paypal and Help Support this site.

   

[briankstan]

any new on Chad's Mini Giant,   After it went up in smoke at the last race it didn't look good.

was it just burnt wires or did the ESC/Speed Controler get toasted as well?   

[CLODGUY]

  The ecs is a total loss,,, the board was fried,,  all of the wires were fried,, and the battery connector melted off of the wires,, the servo still works,, and I think the battery is ok,, it just needs a new connector.. 


   It looks as if the insulation on the wires rubbed off where they exit the case, and shorted the esc

[briankstan]

are you sure you just didn't make is so powerful that it spontaniously combusted.   

seriously,  do you have the parts to repair it? 

[CLODGUY]

  Ive got a new speed controll for it,, but will have to buy new battery connector before I can see if the battery is still good..  

   Mabey Ill take out the flux capacitor so it doesnt go "back in time" when he hits full speed


   Its also in need of a new body,,, but I think I have a spare "hummer" body in a box somewhere,

   It should be running for the next race  ,, going to be a busy week

[Russ]

I got parts also if you need anything. He can use my old black body if needed. New Hummer bodies are easy to find. If you need anything I might have let me know.

[CLODGUY]

   I put my old esc in it,, found a new hummer body in my closet,, dug through my parts and found a new battery plug ,and wires,,

  I got the esc installed, and the body cut out today,,  hopefully I will get the body mounted and painted and the battery re-wired tomorrow and wednsday..   It should be good as new by thursday,,,,,,,  ,,,  just in time for FREESTYLE!!!!!!


    Chad...   Ya owe me one....

[Chad]

Yes i do!!!!

[CLODGUY]

    Well ,,, apparently the "new " esc I used is bad,,   It has absolutly no radio range,, I tried extending the antenna all the way, and gained about 10 ft of radio range,, I tried different xstals,, I even installed a new antenna on the board, and still nothing..   


    SOOO,,, does anyone have a stock   esc that they are willing to part with???    top dollar paid,,  (as long as its not too much ),  ,,,   let me know so I can look into other options if nessessary...


                         Thanxx       Clodguy

[briankstan]

I've got 2 full trucks that I purchased for parts.   I can pull one of the esc's from one of them.

what's it worth?  Let me know.

[CLODGUY]

  Hey Brian,, Ive looked up similar esc's on ebay,, and they go for around 25-30 dollars,,   this will be up to chad..   let us know what ya think...



                     Clodguy

[briankstan]

ok, I'll $25 it that's cool.  LMK and I'll pull it out.

[briankstan]

Chad, Luke.

I have the board pulled out of the truck,  I'll bring it to the race on Thursday, but if you want to come get it before then just let me know,  I think this is all you need to get back up and running.

[Russ]

Hey Chad,
There is a seller on RCTech that is selling RC18 ESC's for $10 shipped each. Sweet deal. I'm picking one up for myself. Would you like me to get one for you? He says he has 3. One with leads and 2 without. I got dibs on the one with. lmkasap.

[redbarton]

I have an AE XP ESC (for the RC18) for sale as well.  It's $75.  As a bonus, I'm including a nearly ready to run and race modded VMG.  Plus, you will have the confidence of buying from a highly trusted R/C local!  Sounds like the best deal, to me!

 

[Russ]

 

Funny Rob. I had a thought though, for you. If you have the patience, you might want to think about parting out your truck. I bet some of the guys here would buy parts, and the rest you could ebay or something. Just a thought.

However a better thought is to man up and bring it out and race with us  . We could race after the mini-z's like we used to if you can make it.

briankstan
Russ
Ryan
Chad
CLODGUY
wild child
benihanna80
trackstar

Utah RC Forums

Mini-Z Forums

  RCP Race Tracks

Mini-Z Racing Venues

Salt Lake Mini-Z Online Store