Salt Lake Mini-Z Club Forum
November 23, 2024, 07:15:33 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Our next race will be Thursday November 21st HFAY Races .  Come Join Us!!
If you have any questions about racing with us,  please make a post or add a comment in the shout box, and someone will help you with the answer.
   
  Home Help Login Register   **
Donations
Donate Via Paypal and Help Support this site.


   

Pages: [1]   Go Down
  Print  
Author Topic: Got my Steering mod complete except for....  (Read 4963 times)
Nic-z
SLC Club Members
Hero Member
***
Offline Offline

Posts: 458


View Gallery


See it like it buy it sell it.


« Topic Start: February 25, 2008, 11:58:13 PM »

Pictures to come soon....But question I finished my steering mod, thanks everyone for the help. I didn the alm angle and jbweld and zip ties.....yeah I ddin't want any movement lol.  So thats all fine, then I put in the battery (six cell) and that powered up great.  Then it was time to test drive it. I managed to bowl over my yorkies and they ran like heck trying to get away (thx to the upgraded motor they didn't stand a chance) took it on the carpet did some wheelies some endo's etc.  But then I noticed my right steer tuns tighter than my left.  I saw the pictures in Russ gallery and can see he put the screw in the far right side of the servo saver...fine. but when I moved mine from there to the center it seemed to have better proportional steering left to right.  As afar as tightness went. Again I will get pictures posted. I fixed the problem...I think it still seems one turns a little tighter than the other, but hey I am just thrilled that sinkin thing works...well that and I epoxy'd the pinion on the motor,,, its not going anywhere.
Logged

Bring it! Team mental be loco!
Russ
Global Moderator
Hero Member
****
Offline Offline

Posts: 704


View Gallery


Man I'm a SPAZ!!


« Reply #1: February 26, 2008, 01:05:53 PM »

I think mine might turn a little tighter on direction also. Not much though and definately tighter both ways than it used to be. You could check your end point adjustments on your radio. And also make sure you center your servo before you put the servo saver on it. Make sure that your steering trim is centered on the radio before powering up the servo and mounting the saver. Then after powering up the servo put the saver on centered. The mounting hole you choose on the servo saver shouldnt matter as long as it travels far enough in each direction.
Logged
Nic-z
SLC Club Members
Hero Member
***
Offline Offline

Posts: 458


View Gallery


See it like it buy it sell it.


« Reply #2: February 26, 2008, 01:14:32 PM »

Check CHeck and triple check, sounds like I am just being a little too nit picky about it all.
Logged

Bring it! Team mental be loco!
CLODGUY
SLC Club Members
Sr. Member
***
Offline Offline

Posts: 196


View Gallery



« Reply #3: February 27, 2008, 07:18:58 AM »

   My steering does it too,,, I just balanced it out on my radio with the dual rate
Logged

CLODGUY MOTORSPORTS
Nic-z
SLC Club Members
Hero Member
***
Offline Offline

Posts: 458


View Gallery


See it like it buy it sell it.


« Reply #4: February 27, 2008, 08:47:23 AM »

I don't think I have a good enough radio for dual rate I will have to check.
Logged

Bring it! Team mental be loco!
Russ
Global Moderator
Hero Member
****
Offline Offline

Posts: 704


View Gallery


Man I'm a SPAZ!!


« Reply #5: February 27, 2008, 09:20:44 AM »

Use you Helios for the VMG it should work I think. Maybe not. If not I would bet that you could use one of your other 27MHZ AM radios that does have it.
Logged
Nic-z
SLC Club Members
Hero Member
***
Offline Offline

Posts: 458


View Gallery


See it like it buy it sell it.


« Reply #6: February 27, 2008, 09:38:49 AM »

eBay there is a heilos Russ for cheap if you are interested maybe you can snag it
Logged

Bring it! Team mental be loco!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Random Photo
Recent
[January 31, 2022, 07:34:33 AM]

[February 11, 2020, 09:45:58 AM]

by Russ
[January 22, 2020, 12:33:31 PM]

by Chad
[December 19, 2019, 05:15:45 PM]

by Russ
[January 03, 2019, 09:33:03 AM]

[December 26, 2018, 11:53:43 AM]

by Russ
[January 19, 2018, 12:01:24 PM]
Quick Links
Utah RC Forums


Mini-Z Forums

  RCP Race Tracks


Mini-Z Racing Venues


Salt Lake Mini-Z Online Store

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
TinyPortal v0.9.8 © Bloc
Valid XHTML 1.0! Valid CSS!